28A Series
Power-burner Boilers, fired
with Oil, Gas or Both
Smith cast iron boilers are ideal in
commercial applications for both hot water and steam heating systems. The
market leader in large commercial cast iron boilers, 28A series boilers are
available in fifteen sizes from 900 to 4,270 MBH with high efficiencies.
28A Series Boiler Features
- Rugged cast iron heat exchanger sections
with integral flue collector
- High temperature flexible graphite port
connectors provide the installation ease of a gasket and long life of a
push nipple
- Graphite port connectors and ceramic fiber
flue gas rope seals reduce assembly time and require no special assembly
tools
- Short, individual draw rods simplify
assembly and reduce stress
- Front and rear observation ports to
visually inspect the flame and combustion chamber
- Easy-to-remove, front access covers and
side mounted cover plates for quick and easy boiler cleaning
- Side mounted tankless coil domestic water
heaters (when provided) for easy inspection and/or replacement
- Cast iron smoke hood with integral
fail-safe breeching damper that is easily adjusted and locked into
position
- Obround shapred upper port for improved
internal circulation and dry steam
- Factory packaged or knocked down for field
assembly
- Choice of Beckett, Carlin, Powerflame and
Webster power burners with a wide array of controls (when provided)
Please Note:
The Roberts Mechanical Equipment Company
nor its respective vendors shall be responsible for improper application of
this equipment. Prior to downloading drawings or specifications, it is the
responsibility of the specifying engineer or the installing contractor to
completely review and understand the installation manual for each individual
product (offered here). In addition, many of the supplied drawings are
available in a .dwg or .dwf format for engineers to easily incorporate into
their drawings. Simply email us your request and we will forward you the
appropriate information.
Question or concerns should be directed to RME via email:
info@robertsmech.com |

PRODUCT LITERATURE
28A Series Installation Manual
(2.4MB)
28A Series Jacket
Assembly Instructions (54K)
28A Series Return Yoke Assembly - Groved (1.1MB)
28A Series Carlin
Burner Instructions (14K)
28A Series
Powerflame Burner Instructions (19K)
28A Brochure
(1.7MB)
|
STANDARD EQUIPMENT
All Boilers
- Cast iron wet-base sections rated for 80
psi (hot water) and 15 psi (steam)
- ASME safety relief valve
- Hi limit, manual reset control
- Operating temperature or pressure control
- Burner mounting plate with insulation
block
- Insulated metal jacket, steel floor rails
and flue brush
Water Boilers
Steam Boilers
|